Vertic Triplelock II -valjaat ja rintakehän Cruiser: Osta nyt! Turvallisuus ja mukavuus.

Vertic Triplelock II - Turvallinen kiipeilyvaljas ja rintavaljaat, elämyksiä etsivälle!

Tässä on jotain sellaista mitä et tiennyt tarvitsevasi, mutta nyt et voi elää ilman sitä. Kuvittele hetki: aamu Helsingissä, kahvin tuoksu ja tämä... Tämä on enemmän kuin esine, se on tarina, tunne, hyvän olon lähde. Kokeile, tunne, rakastu. Tämä on elämää varten.

€293.61 €587.21

Size:

Size 0

Size 1

Size 2

Määrä:

Kuvaus

Fall arrest, and seat harness with an integrated chest ascender.

The VERTIC is a fully-equipped fall arrest, work positioning and seat harness with a multitude of innovative and detailed solutions. For even more efficiency when ascending and moving in rope systems, the CHEST CRUISER chest ascender is firmly sewn into the VERTIC TRIPLE LOCK.

Features

The vertical backstraps run sideways over the hip. This ensures maximum freedom of thigh movement and when bending the upper body.
The waist belt is fixed to the vertical backstraps with a VCR fastener. This means that, when heavy equipment is carried, the load is optimally transferred to the shoulder bands.
Leg loop construction with three-dimensional design and elastic inserts for maximum freedom of movement and optimum hanging comfort
Covered buckles protect the webbing from premature wear at exposed points
Quick and easy handling of tape ends (even when wearing gloves) thanks to a stopper seam before the end stop
Two fall arrest eyelets in accordance with EN 361 (dorsal fall arrest eyelet flexibly mounted to prevent snagging in shafts or narrow passages)
Four rigid gear loops for up to twelve carabiners (load: 25 kg)
Two gear straps with click buckles on the back of the waist belt for attaching further equipment (e.g. first aid kit)
Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard
Central eyelet according to EN 813 for attaching an abseiling device
One attachment option for the SM clip on each leg loop
Two central loops for attaching a work positioning seat (Air Lounge)
Two freely positionable gear loops for accommodating a Y-shaped lanyard (load: 0 kN)
The harness is easy to put on and take off from the side (using a Triple Lock buckle), no need to pull it over the head
Two loops on the chest harness for attaching a radio set or for accommodating a fall arrester
ANSI certified
Integrated RFID chip for simplified operational documentation
CHEST CRUISER integrated chest ascender for maximum efficiency when ascending ropes
Two elastic straps around the chest for a perfect fit at all times (regardless of the load on the harness system)

Technical Information

Certification: EN 361
Certification: EN 358
Certification: EN 813
Certification: ANSI / ASSE Z359.11-2014
Fall Arrest Eyelet Front
Fall Arrest Eyelet Back
Lataral Eyelets
Restraint Loop
Adjustable leg loops
Moveable foam waist padding

Edelrid Technology

Indicator Webbing
All load-bearing straps of our harnesses are equipped with indicator webbing. In the event of excessive wear a red wear indicator warning thread becomes visible – alerting the user that the harness should be replaced.
RFID inside
Harnesses with integrated RFID transponders — for quick registration and effective management of PPE equipment. Using appropriate software it is possible to monitor application cycles and/or the PPE status of the product. This saves time and money while increasing safety.